PRODUCT FOCUS

New High-Reflectance Coating Brightens Industrial Ceilings
DIAMOND VOGEL
A new, brilliant-white, dri-mist coating designed for large ceiling areas achieves a light reflectance value (LRV) of 92%, positioning it among the highest-performing reflective coatings available. The flat latex coating is engineered specifically for warehouses, gymnasiums and manufacturing facilities, offering enhanced visibility and improved lighting efficiency. The coating features advanced hiding capabilities that exceed traditional dri-mist and dry-fall formulations. Its specialized formulation allows overspray to dry before reaching the floor, making it particularly suitable for efficient application in expansive commercial settings.

Image courtesy of Diamond Vogel.
Check out this product >>

High-Reflectance Coating

PFAS-Free Powder Offers Alternative for Sliding Properties
MITSUI CHEMICALS
A new, spherical, ultra-high molecular weight polyethylene (UHMW-PE) fine powder, Mipelon, offers manufacturers an alternative to PTFE for improving sliding properties and abrasion resistance in coatings, plastics and rubbers. The powder features an average particle size of 10 µm for its finest grade, with specialized versions suitable for temperatures up to 120 °C and a specialty grade rated for 200 °C in hydrocarbon oil applications. With a density of 0.97 g/cm3 — approximately half that of PTFE — the material provides weight reduction benefits while maintaining performance.

Image courtesy of Mitsui.
Check out this product >>

PFAS-Free Powder Additive

PLACE THE INFORMATION ABOVE IN DESKTOP VIEW.

DUPLICATE THE SECTIONS: 1 TIME FOR TABLET / MOBILE.

LAYER VISIBILITY: LEAVE DESKTOP VERSION TURNED ON FOR IMAGE 1. TURN OFF LAYERS YOU DON'T NEED.

New High-Reflectance Coating Brightens Industrial Ceilings
DIAMOND VOGEL
A new, brilliant-white, dri-mist coating designed for large ceiling areas achieves a light reflectance value (LRV) of 92%, positioning it among the highest-performing reflective coatings available. The flat latex coating is engineered specifically for warehouses, gymnasiums and manufacturing facilities, offering enhanced visibility and improved lighting efficiency. The coating features advanced hiding capabilities that exceed traditional dri-mist and dry-fall formulations. Its specialized formulation allows overspray to dry before reaching the floor, making it particularly suitable for efficient application in expansive commercial settings.

Image courtesy of Diamond Vogel.
Check out this product >>

High-Reflectance Coating

PFAS-Free Powder Offers Alternative for Sliding Properties
MITSUI CHEMICALS
A new, spherical, ultra-high molecular weight polyethylene (UHMW-PE) fine powder, Mipelon, offers manufacturers an alternative to PTFE for improving sliding properties and abrasion resistance in coatings, plastics and rubbers. The powder features an average particle size of 10 µm for its finest grade, with specialized versions suitable for temperatures up to 120 °C and a specialty grade rated for 200 °C in hydrocarbon oil applications. With a density of 0.97 g/cm3 — approximately half that of PTFE — the material provides weight reduction benefits while maintaining performance.

Image courtesy of Mitsui.
Check out this product >>

PFAS-Free Powder Additive

PLACE THE INFORMATION ABOVE IN DESKTOP VIEW.

DUPLICATE THE SECTIONS: 1 TIME FOR TABLET / MOBILE.

LAYER VISIBILITY: LEAVE DESKTOP VERSION TURNED ON FOR IMAGE 1. TURN OFF LAYERS YOU DON'T NEED.

Multi-Shaft Mixer Handles High-Viscosity Formulations
ROSS
The 320-gallon system combines a two-wing anchor agitator (10 HP, 29 rpm), pitched blade turbine (5 HP, 257 rpm) and auger agitator (10 HP, 135 rpm). Built in type 304 stainless steel with 80-grit finish, the mixer includes Teflon scrapers and an air/oil hydraulic lift for operator access. A 7-inch touchscreen control panel enables independent speed adjustment, load monitoring and cycle timing. The system accommodates interchangeable mix cans on non-sparking casters for semi-continuous operation, with discharge through a 3-inch flush-bottom ball valve. Safety limit switches prevent operation when stirrers are raised or vessels removed.

Image courtesy of ROSS.
Check out this product >>

Multi-Shaft Mixer

Mobile Drum Dumper Designed for Hazardous Locations
FLEXICON
The new TIP-TITE® mobile drum dumper with integrated flexible screw conveyor enables safe, dust-free transfer of bulk materials in hazardous locations. The system features a pneumatically powered hydraulic lift that eliminates spark risks from electrical equipment, while conveyor controls are positioned outside the hazardous zone for additional safety. The unit handles drums from 30 to 55 gal (115 to 200 L) and creates a dust-tight seal during operation. Its flexible screw conveyor uses a self-centering design that minimizes material grinding and maintenance needs. Mounted on a mobile frame with quick-action floor jacks, the system can be positioned anywhere in the facility and stored when not in use.

Image courtesy of Flexicon.
Check out this product >>

Mobile Drum Dumper

PLACE THE INFORMATION ABOVE IN DESKTOP VIEW.

DUPLICATE THE SECTIONS: 1 TIME FOR TABLET / MOBILE.

LAYER VISIBILITY: LEAVE DESKTOP VERSION TURNED ON FOR IMAGE 1. TURN OFF LAYERS YOU DON'T NEED.

Multi-Shaft Mixer Handles High-Viscosity Formulations
ROSS
The 320-gallon system combines a two-wing anchor agitator (10 HP, 29 rpm), pitched blade turbine (5 HP, 257 rpm) and auger agitator (10 HP, 135 rpm). Built in type 304 stainless steel with 80-grit finish, the mixer includes Teflon scrapers and an air/oil hydraulic lift for operator access. A 7-inch touchscreen control panel enables independent speed adjustment, load monitoring and cycle timing. The system accommodates interchangeable mix cans on non-sparking casters for semi-continuous operation, with discharge through a 3-inch flush-bottom ball valve. Safety limit switches prevent operation when stirrers are raised or vessels removed.

Image courtesy of ROSS.
Check out this product >>

Multi-Shaft Mixer

Mobile Drum Dumper Designed for Hazardous Locations
FLEXICON
The new TIP-TITE® mobile drum dumper with integrated flexible screw conveyor enables safe, dust-free transfer of bulk materials in hazardous locations. The system features a pneumatically powered hydraulic lift that eliminates spark risks from electrical equipment, while conveyor controls are positioned outside the hazardous zone for additional safety. The unit handles drums from 30 to 55 gal (115 to 200 L) and creates a dust-tight seal during operation. Its flexible screw conveyor uses a self-centering design that minimizes material grinding and maintenance needs. Mounted on a mobile frame with quick-action floor jacks, the system can be positioned anywhere in the facility and stored when not in use.

Image courtesy of Flexicon.
Check out this product >>

Mobile Drum Dumper

PLACE THE INFORMATION ABOVE IN DESKTOP VIEW.

DUPLICATE THE SECTIONS: 1 TIME FOR TABLET / MOBILE.

LAYER VISIBILITY: LEAVE DESKTOP VERSION TURNED ON FOR IMAGE 1. TURN OFF LAYERS YOU DON'T NEED.

How-To Video Series Enhances Paint and Coatings Testing
GARDCO
A comprehensive how-to video series guides users on operating its paint and coatings test instruments. The series covers tools such as viscosity cups, drying time recorders, density cups and the X-Cut Cross Hatch Adhesion Tester. Designed for both seasoned professionals and new users, the videos provide easy-to-follow demonstrations, expert tips and techniques to ensure long-term accuracy and repeatability. The library aims to optimize testing processes and help achieve precise results.

Image courtesy of Gardco.
Check out this product >>

Testing How-To Videos

Gear-Drive Mixers Handle Medium to Heavy Viscosity Materials
INDCO
New gear-drive, clamp-mount mixers provide mixing capability for medium to heavier viscosity materials with power options from 1/4 to 4 HP. Available with air or electric drive, the units feature totally enclosed fan-cooled, enclosed non-ventilated or explosion-proof motors. The mixers include stainless steel wetted parts for chemical resistance and an adjustable clamp for tool-free vertical positioning. Single-phase TEFC models come equipped with cord, plug and switch, while EP models include motor leads. The series suits various general mixing applications, with direct-drive models available for more viscous materials.

Image courtesy of INDCO.
Check out this product >>

Gear-Drive Mixers

PLACE THE INFORMATION ABOVE IN DESKTOP VIEW.

DUPLICATE THE SECTIONS: 1 TIME FOR TABLET / MOBILE.

LAYER VISIBILITY: LEAVE DESKTOP VERSION TURNED ON FOR IMAGE 1. TURN OFF LAYERS YOU DON'T NEED.

How-To Video Series Enhances Paint and Coatings Testing
GARDCO
A comprehensive how-to video series guides users on operating its paint and coatings test instruments. The series covers tools such as viscosity cups, drying time recorders, density cups and the X-Cut Cross Hatch Adhesion Tester. Designed for both seasoned professionals and new users, the videos provide easy-to-follow demonstrations, expert tips and techniques to ensure long-term accuracy and repeatability. The library aims to optimize testing processes and help achieve precise results.

Image courtesy of Gardco.
Check out this product >>

Testing How-To Videos

Gear-Drive Mixers Handle Medium to Heavy Viscosity Materials
INDCO
New gear-drive, clamp-mount mixers provide mixing capability for medium to heavier viscosity materials with power options from 1/4 to 4 HP. Available with air or electric drive, the units feature totally enclosed fan-cooled, enclosed non-ventilated or explosion-proof motors. The mixers include stainless steel wetted parts for chemical resistance and an adjustable clamp for tool-free vertical positioning. Single-phase TEFC models come equipped with cord, plug and switch, while EP models include motor leads. The series suits various general mixing applications, with direct-drive models available for more viscous materials.

Image courtesy of INDCO.
Check out this product >>

Gear-Drive Mixers

PLACE THE INFORMATION ABOVE IN DESKTOP VIEW.

DUPLICATE THE SECTIONS: 1 TIME FOR TABLET / MOBILE.

LAYER VISIBILITY: LEAVE DESKTOP VERSION TURNED ON FOR IMAGE 1. TURN OFF LAYERS YOU DON'T NEED.

Buyers' Guide Premium Listings

UP NEXT

Buyers' Guide Premium Listings